Spec your board, read the price. A free instant estimate for rigid, flex, rigid-flex, HDI and ceramic PCBs — then a firm, itemized 24-hour fabrication quote with a DFM review on every order.
Ballpark estimate only. Final pricing follows a free DFM review — firm itemized quote within 24 hours.
From simple two-layer FR4 to 56-layer backplanes, microvia HDI and high-power ceramic. Pick a technology to load it into the estimator, or jump straight to a firm quote.
Standard and high-Tg FR4 boards from 1 to 56 layers, with tight tolerances and controlled impedance for everything from consumer gadgets to industrial controllers.
Single- to multi-layer polyimide flex with coverlay and stiffeners, plus hybrid rigid-flex stack-ups that fold rigid and flex zones into one board to kill connectors and shrink assemblies.
High-density interconnect with laser microvias, stacked and staggered vias, and any-layer builds (1+N+1, 2+N+2) for dense, fine-pitch BGA designs in phones, radar and medical devices.
Alumina (Al₂O₃) and aluminum-nitride (AlN) substrates built by thick-film, DPC or DBC for high-power, high-thermal LED engines, RF front-ends and power modules running −55 °C to +250 °C.
The estimator gives you a number now. Here's how a ballpark turns into a firm, itemized fabrication quote.
Submit specs through the estimator or upload Gerbers. An NDA is signed first on request, before files change hands.
Engineers check manufacturability and flag cost drivers or issues — at no charge, before you commit a cent.
You get a clear, itemized fabrication quote — usually within a day of files landing, longer only for complex builds.
Confirm the order and the 5,000 ㎡ line fabricates and ships worldwide, with full traceability and on-time delivery.
Every fab prices differently, but the same six levers dominate every quote. Tune them in the estimator to see the trade-offs before you commit a design.
Each added layer means more lamination, drilling and material. Routing two extra layers out of a design can quietly cut a third off the price.
Bigger boards eat more panel; larger runs spread setup and tooling (NRE) over more units. Prototype-of-five always costs more per board.
FR4, Rogers, polyimide and ceramic sit at very different price points. HASL is cheapest; ENIG, hard gold and immersion silver carry a premium.
Through-hole is standard. Blind, buried and laser microvias add drilling, plating and sequential lamination — the heart of HDI cost.
Fine 3/3 mil lines, tight impedance and small drills demand precision gear and lower yields. Loosen what the design doesn't truly need.
IPC Class 3, automotive or medical testing add documentation. Rush builds carry an expedite premium over standard lead time.
Read the instant ballpark above, or send your Gerbers and get firm fabrication pricing — plus a free DFM review — back within 24 hours.